Stainless Steel Polymer Candle Filter

CPF series product application range: filterable materials include fluid (melt, melt) polymers, prepolymers and monomers, such as polyester (PET), nylon (PA6, PA66), polypropylene (PP), Thermoplastic polymers such as polyethylene (PE) and polyurethane (PU) and other viscous thermal fluids; used in continuous polycondensation (such as PET, PBT, Nylon6), polyester filament, foam bottle flakes and other recycled materials spinning , Nylon filament, polypropylene spunbond non-woven fabric, polypropylene polyethylene stretch film, BOPET, polypropylene filament, zipper monofilament and other fields.

The CPF series melt filter is a chemical polymer filter with continuous switching of double filter chambers. It is suitable for continuous filtration of high polymer melt to remove impurities and unmelted gel particles in the melt, improve the spinning performance of the melt and ensure spinning quality; in high-speed spinning, spinning fine denier and regeneration When material spinning, it is an indispensable equipment; it plays an obvious role in extending the life of spinning components, improving equipment utilization and increasing output.

Size: OD 42 mm x L460 MM， OD42 mm x L750 MM， OD42mm x L1150 MM

Filtration media: four layers stainless Steel Woven wire mesh.

Filtration rating: 200mesh,250mesh etc

Candle filter pleated 75μm, PET

Dimension Outer diameter. 46.5 mm; Length 512,0mm

Flow direction from outside to inside

Filter finess: 75μm

Wire mesh layers from outside to inside:

W 1.0 mm d 0.40mm,20mesh

W 0.34mm d 0.16 mm 50mesh

W 0.075mm d 0.050mm 180mesh

W 1.0 mm d 0.40 mm,20mesh

Filter area 0.30m²˚