Send Email
Skype
whatsapp
China Ion-Exchange Membrane Electrolyzer Hose - Leading Suppliers and Factory for High-Performance Gaskets
Electrolysis Section: Electrolyzer hose
a. Anolyte System
The super purified brine from the super purified brine tank is fed through to each electrolyzer manifold and then distributed to each anode chamber where it decomposes into chlorine and sodium ions. A flow controller equipped with feed brine pipeline to each electrolyzer circuit monitors the super purified brine flow rate.
A two-phase stream of depleted brine and wet chlorine gas overflows from each anode chamber into a collection manifold equipped with each electrolyzer in which depleted brine and chlorine gas are separated.
The depleted brine from the manifold flows through branch pipe and main header into an anolyte tank by gravity, while the chlorine gas is sent to the B/L (chlorine gas processing section).
The depleted brine from the anolyte tank is pumped to the dechlorination section by level controller. Some of depleted brine in the anolyte tank is recycled to the electrolyzers by mixing with the fresh super purified brine.
Demineralized water supply line is provided for anolyte dilution to prevent salt crystallization during shutdown and for anolyte concentration adjustment to meet membrane requirement during start-up.
b. Catholyte System
Recycle caustic is fed to each electrolyzer manifold through a catholyte heat exchanger, and is then distributed to each cathode chamber where the cathode reaction decomposes water into the hydrogen and the hydroxide ions. A flow controller mounted at each electrolyzer circuit controls the recycle caustic flow rate.
A two-phase stream of caustic solution and hydrogen gas overflows from each cathode chamber into a collection manifold equipped with each electrolyzer in which the caustic solution and the hydrogen are separated.
The caustic solution from the manifold flows through the branch pipe, and the main header into catholyte tank by gravity, while the hydrogen gas is sent to hydrogen gas processing section through the branch and header pipe. Upon leaving the recycle caustic tank, the caustic solution separates into two streams: a product stream to the B/L and a recycle caustic stream to the electrolyzers.
The caustic soda heat exchanger heats or cools the recycled caustic to maintain the electrolyzer operating temperature at 85 ~ 90 deg-C. During start up, the caustic soda heat exchanger is used to warm the electrolyte in the electrolyzers, accelerating the full current load attainment without excessive voltage.
The electrolyzer caustic strength is monitored by a caustic density indicator, and normally kept at approximately 32wt%, the optimum membrane performance concentration, by controlling the demineralized water feed quantity into the recycled caustic stream.
To detect abnormalities of electrolyzers, electrolyzer voltage and temperature monitoring system are installed.
c. Gas system
The hydrogen gas pressure is controlled at approx. 400 mm H2O higher than chlorine gas pressure.
Frequently Asked Questions
How is the flow rate of the super purified brine monitored in the Anolyte System?
The super purified brine flow rate is monitored by a flow controller equipped with the feed brine pipeline to each electrolyzer circuit.
What is the purpose of the demineralized water supply in the Anolyte System?
It is used for anolyte dilution to prevent salt crystallization during shutdown and for adjusting the anolyte concentration to meet membrane requirements during start-up.
How is the operating temperature of the electrolyzer maintained?
The electrolyzer operating temperature is maintained at 85 ~ 90 deg-C using a caustic soda heat exchanger that heats or cools the recycled caustic.
What is the optimum concentration for membrane performance in the Catholyte System?
The optimum concentration is approximately 32wt% caustic strength. This is monitored by a caustic density indicator and controlled by adjusting the demineralized water feed quantity into the recycled caustic stream.
What systems are in place to detect abnormalities in the electrolyzers?
To detect abnormalities, an electrolyzer voltage and temperature monitoring system are installed.
How is the hydrogen gas pressure controlled relative to the chlorine gas pressure?
The hydrogen gas pressure is controlled to be approximately 400 mm H2O higher than the chlorine gas pressure.