Industry News

Process design and equipment selection of Nonferrous Metal Co.' s 700 kt/a sulphuric acid plant based on copper smelter off-gas are described.The plant adopted a cleaning section consisting of two-stages DynaWave scrubbers,packed cooling tower and two-stages wet electrostatic ...

MECS brink filters (mist eliminators) for sulphonation plant. ► It can effectively protect fans and heat exchangers, prevent catalyst poisoning, ensure balanced production, prevent atmospheric pollution, and protect the environment when used after the drying tower in sulfur...

1. Introduction Sintered Felt Filter is made of stainless steel fiber sintered felt, with the characteristic of high pressure, high temperature and chemical corrosion resistance. It also has good air permeability, high dirt holding capacity, long service-life, cleanable and r...

Bekaert（Bekipor ） Ultrafine fibers with wire diameters as low as 1.5 microns are used to provide ultra-high porosity and permeability. It can maintain extremely low filtration resistance under the working condition of filtering submicron particles. At the same time, Bekipor ma...

Applications: Suitable for both direct melt spinning and chip spinning in production of polyester yarn (POY). Features： ◆ Featuring higher output, twice as high as conventional equipment per position and lower equipment investment.. ◆ Newly designed spin beam with ...

MANFRE METAL FIBER is a non-woven filter made of laminated, sintered layers of metal fiber felt (stainless steel is standard). This medium has excellent heat, pressure and corrosion resistance, and it is used for high temperature, high viscosity fluid filtration. FUJI METAL FI...

Manfre have supplied several filters for Molten Sulphur Filtration in sulphuric acid & sulphonation plants. Normally ‘ASH’ is a impurity which needs to be removed from sulphur so that further processing using molten sulphur should be smooth.

Five-layer Sintered laminates is made of different diameter wires and meshes distributed in a certain sequence, through high temperature sintering. Five-layer Sintered laminates has higher strength than stainless steel fiber media, better permeability than metal powder product...